| back | California Cube (rev.II) |
|||
   |
|
 |
||
| EQC-1 active equalizer: | California Cube (rev.II) Specifications: | |||
| Toroidal transformer (115/230 VAC) | Frequency response: 45Hz-16.5kHz -5dB | |||
| Close tolerance metal film resistors | Sensitivity: 90dB/1W/1m | |||
| Close tolerance polypropylene capacitors | Nominal impedance: 8 ohms | |||
| Very low distortion, very high speed IC's | Rated power handling: 120w | |||
| Short signal path on double sided glass epoxy board | Suggested amplifier power: 10wpc - 500wpc | |||
| Active circuitry bypass switch | Enclosure dimensions: 13 5/8" od cubed | |||
| Bass rolloff filter: 18db/octave slope @ 64Hz (switched) | (4) 4.5" full range drivers per enclosure | |||
| Processor weight: 3 lbs. | Speaker weight: 27 lbs | |||
|
|
||||